Edmund Optics uses cookies to optimize and enhance the features and content on our website. By continuing to use this website, you consent to our use of cookies.

  • My Account
  •   
 
Category
    Type
    Type of Optics
    Size of Compatible Optics (mm)
    Compatible Post
    1" Optical Axis Height
    Motorized

    Benchtop Optical Mounts

    Benchtop Optical Mounts are used to mount or position optical components including optical filters, optical lenses, prisms, polarizers, or laser assemblies for benchtop/breadboard applications. Optics Mounts are mounting components that use a number of securing methods such as bar, ring, kinematic, or gimbal to safely hold optical components without risk of damage or unwanted movement. Benchtop Optical Mounts are essential additions to any optical system or application by providing the means to position components for effective implementation.

    Edmund Optics offers a wide range of Benchtop Optical Mounts suited for many mounting needs. Optical Mounts provide a wide selection of different mounting options that grant significant customization potential for any optical application. The variety of Optical Mounts offered by Edmund Optics eases system setup or component integration. Many Optical Mounts are available in both English as well as metric varieties to increase compatibility with a range of optical breadboards or lab tables.

    Optical Mirror Mounts | View All

    Kinematic Circular Optical Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Circular Optical Mounts
    • 100 TPI Fine Adjustment Screws
    • Fingercuts for Convenience and Accuracy
    • Tip/Tilt Range:±5°
    Kinematic Square Optical Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Square Optical Mounts
    • 100 TPI Fine Adjustment Screws
    • Fingercuts for Convenience and Accuracy
    • Tip/Tilt Range: ±5°
    Kinematic Table Platforms
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Table Platforms
    • Fine Adjustment Screw Threads: 100 TPI
    • Removable Turning Knobs for Hex Key Access
    • Lockable Adjustment Screws
    Kinematic Mount Accessories
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Mount Accessories
    • Fine Adjustment Screw Threads: 100 TPI
    • Tip/Tilt Range: ±5 degrees
    • Fingercuts Allow Improved Component Edge Access
    • Compatible for English/Metric Equivalent Component Sizes
    • Removable Turning Knobs for Hex Key Access
    • 12.5mm Mounts Share Interchangeable Platform with 25mm Mounts
    Compact Kinematic Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Compact Kinematic Mounts
    • M3 x 0.2 Fine Adjustment Screw Threads
    • <25mm Overall Profile
    • Lockable for Improved Stability
    Top Adjustment Kinematic Mounts
    Top Adjustment Kinematic Mounts
    • Micrometer-Driven Tilt Adjustment
    • Color Coded Knobs for Pitch and Roll
    • Set Screws and Delrin® Pads Hold Optical Component in Place
    • Posts and Post Holders Required for Mounting
    Optical Cell Kinematic Mounts
    Optical Cell Kinematic Mounts
    • Robust Kinematic Mounts for Larger Diameter Optics
    • Ball Pivot and Fine Pitch Screws Provide Pitch and Roll
    • 50% Greater Resolution than Micrometer Adjustments
    Self-Centering Jaw Clamp and Kinematic Mount
    Self-Centering Jaw Clamp and Kinematic Mount
    • Jaw Clamp Mounts Alone (¼-20) or to Kinematic Frame
    • Accepts up to 4-¼" Diameters
    • Fine Angular Resolution Kinematic
    Motorized Kinematic Mount
    Motorized Kinematic Mount
    • Excellent Resolution and Repeatability
    • Easy to Use with Integrated Motor and Controller
    • Controlled Manually or Via RS-232 Serial Interface
    • ½” (12.5mm), 1” (25mm) and C-mount Adapters Available
    Small Angle Mirror Mounts
    Small Angle Mirror Mounts
    • 1.0” or 1.5” Square Mounting Surface
    • Two Fine Adjustment Screws (64-Pitch) Allow for Tilting
    • Models with Pre-Mounted λ/4 Mirror Available
    Small Straight Mirror Mounts
    Small Straight Mirror Mounts
    • 1.0” or 1.5” Square Mounting Surface
    • Two Fine Adjustment Screws (64-Pitch) Allow for Precise Tilting
    • Models Pre-Mounted with a λ/4 Mirror Available
     Medium and Large Angle Mirror Mounts
    Medium and Large Angle Mirror Mounts
    • 3.0”, 4.5”, or 6.0” Square Mounting Surface
    • Fine Adjustment Screws (64-Pitch) Allow for Tilting
    • Mounting Plate with ¼-20 Threaded Holes
    Metric Mirror Mounts
    Metric Mirror Mounts
    • Two-Axis Tilt Control
    • 25mm Square Mounting Surfaces
    • Back or Top Screw Options
    • Slotted or Threaded Based Options
    • Black Anodized Aluminum
    • Posts and Post Holders Required for Mounting
    Beam Steering Assemblies
    Beam Steering Assemblies
    • Ready to Use Beam Steering Assembly
    • High Resolution 100 TPI Kinematic Mounts
    • Available with 20mm Post for Higher Stability
    Precision Gimbal Mounts
    Precision Gimbal Mounts
    • Precision Micrometer Movement
    • Coarse Angular Translation, 360°
    • Fine Angular Translation, 0.25mm Pitch
    • Color Coded Knobs for Pitch and Roll
    • Posts and Post Holders Required for Mounting
    Zaber™ Motorized Gimbal Mount with Built-In Controller
    Zaber™ Motorized Gimbal Mount with Built-In Controller
    • Two-Axis Gimbal Mount with ±7° of Rotation
    • Features Built-In Controller
    • Can be Controlled Manually or via RS-232 Serial Interface
    Compact Direct Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×

    Compact Direct Mounts
    • Direct to Breadboard Mounting
    • 25.4mm Centerline Height
    • Compact Form Factor
    Optic Component Mounts
    Optic Component Mounts
    • Simple Mounting Arrangement
    • Metric and English Configurations
    • Black Anodized Aluminum Construction
    • Posts and Post Holders Required for Mounting
    English Bar-Type Holders
    English Bar-Type Holders
    • For Quick, Precise Positioning of Circular Optics
    • Mount Optics up to 118mm Diameter
    • 1/4-20 TPI Mounting Thread for Post Mounting Applications
    Metric Bar-Type Holders
    Metric Bar-Type Holders
    • Mount Optics 5 to 60mm in Diameter
    • M6 x 1.0 Mounting Thread
    • Max Edge Thickness of 2mm and 4mm
    • Posts and Post Holders Required for Mounting
    Metric Rectangular Optic Mounts
    Metric Rectangular Optic Mounts
    • Black Anodized Aluminum
    • M6 x 1.0 Mounting Thread
    • Posts and Post Holders Required for Mounting

    Optical Lens and Filter Mounts | View All

    Compact Direct Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×

    Compact Direct Mounts
    • Direct to Breadboard Mounting
    • 25.4mm Centerline Height
    • Compact Form Factor
    Optic Component Mounts
    Optic Component Mounts
    • Simple Mounting Arrangement
    • Metric and English Configurations
    • Black Anodized Aluminum Construction
    • Posts and Post Holders Required for Mounting
    Optical Cell Assemblies
    Optical Cell Assemblies
    • Robust Mounts for Larger Diameter Optics
    • ¼-20 Mounted Hole for Post Mounting
    • Thread into Optical Cell Kinematic Mounts to Add Tip/Tilt Adjustment
    English Bar-Type Holders
    English Bar-Type Holders
    • For Quick, Precise Positioning of Circular Optics
    • Mount Optics up to 118mm Diameter
    • 1/4-20 TPI Mounting Thread for Post Mounting Applications
    Metric Bar-Type Holders
    Metric Bar-Type Holders
    • Mount Optics 5 to 60mm in Diameter
    • M6 x 1.0 Mounting Thread
    • Max Edge Thickness of 2mm and 4mm
    • Posts and Post Holders Required for Mounting
    Metric Rectangular Optic Mounts
    Metric Rectangular Optic Mounts
    • Black Anodized Aluminum
    • M6 x 1.0 Mounting Thread
    • Posts and Post Holders Required for Mounting
    Three-Screw Ring Mounts
    Three-Screw Ring Mounts
    • Ideal for Mounting and Centering Circular Optics and Laser Tubes
    • Protective Nylon Tipped Screws
    • 1/4-20 TPI Mounting Thread for Post Mounting Applications
    Fixed Filter Mounts
    Fixed Filter Mounts
    • Non-Marring Surface
    • 3 Sizes Available
    • M6 x 1.0 mounting hole
    • Black Anodized Aluminum
    • Posts and Post Holders Required for Mounting
    Metric Spring/Mount Filter Holder
    Metric Spring/Mount Filter Holder
    • Ideal for Rectangular and Circular Filters
    • Convenient for Quickly Changing Optics
    • Posts and Post Holders Required for Mounting
    X-Y Translating Optic Mounts
    X-Y Translating Optic Mounts
    • Allows ±1.5mm Translation in X and Y
    • Accepts Optics up to 15mm Thick
    • 0.25mm Pitch for Fine Alignment of Components
    X-Y-Z Translating Optic Mounts
    X-Y-Z Translating Optic Mounts
    • Similar to Above Mounts, but with Additional Z-Axis Adjustment
    • One Unit can Adjust Alignment and Spacing
    • One Mount Replaces Three Stages
    Variable Filter Translation Mount
    Variable Filter Translation Mount
    • Designed for Filters Up to 3mm Thick
    • Horizontal or Vertical ¼-20 Mounting Holes
    • Posts Not Included
    • Smooth Motion with Integral Locking Screw
    Kinematic Filter Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Filter Mounts
    • Holds Square/Rectangular Filters Up to 50.8mm x 50.8mm
    • Tip/Tilt Range: ±5°
    • Removable Turning Knobs for Motorized Solutions
    • Two and Three Screw Versions Available
    Self-Centering Jaw Clamp and Kinematic Mount
    Self-Centering Jaw Clamp and Kinematic Mount
    • Jaw Clamp Mounts Alone (¼-20) or to Kinematic Frame
    • Accepts up to 4-¼" Diameters
    • Fine Angular Resolution Kinematic
    Fixed/Multiple Filter Mounts
    Fixed/Multiple Filter Mounts
    • Allows Stacking of 3 or 5 Filters
    • Black Anodized Aluminum
    • Posts and Post Holders Required for Mounting
    Rotating Filter Wheels
    Rotating Filter Wheels
    • Holds Six or Twelve Filters
    • Accepts 1" / 25mm or ½" / 12.5mm Diameters
    • 12 Index Positions for Precise Movement
    Manual Cage Filter Wheel
    Manual Cage Filter Wheel
    • Cage and Tube System Compatible
    • Holds 25mm Filters
    • 6 Discrete Positions
    Miniature Motorized Filter Wheels
    Miniature Motorized Filter Wheels
    • Manual or Automated Multi-Directional Control
    • Interchangeable Filter Retaining Wheels
    • Lightweight Design with Multiple Mounting Options
    Motorized Filter Wheels
    Motorized Filter Wheels
    • USB or RS-232 Interface
    • Bi-Directional Movement
    • C-Mount and T-Mount Adapters Available

    Prism and Beamsplitter Mounts | View All

    Kinematic Circular Optical Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Circular Optical Mounts
    • 100 TPI Fine Adjustment Screws
    • Fingercuts for Convenience and Accuracy
    • Tip/Tilt Range:±5°
    Kinematic Square Optical Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Square Optical Mounts
    • 100 TPI Fine Adjustment Screws
    • Fingercuts for Convenience and Accuracy
    • Tip/Tilt Range: ±5°
    Kinematic Filter Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Filter Mounts
    • Holds Square/Rectangular Filters Up to 50.8mm x 50.8mm
    • Tip/Tilt Range: ±5°
    • Removable Turning Knobs for Motorized Solutions
    • Two and Three Screw Versions Available
    Kinematic Mount Accessories
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Kinematic Mount Accessories
    • Fine Adjustment Screw Threads: 100 TPI
    • Tip/Tilt Range: ±5 degrees
    • Fingercuts Allow Improved Component Edge Access
    • Compatible for English/Metric Equivalent Component Sizes
    • Removable Turning Knobs for Hex Key Access
    • 12.5mm Mounts Share Interchangeable Platform with 25mm Mounts
    Risley Prism Mount
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Risley Prism Mount
    • Compact, Robust Mount for Beam Steering Applications Using Risley Prism Pairs
    • Manually Steer a Beam to any Angle up to ±2 Times the Individual Prism Deviation Angle
    • Optimized for Prisms with Wedge Angles Ranging from 0 to 26 Degrees
    • Mount Can be Used with Either a Single or Pair of Wedge Prisms
    Compact Direct Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×

    Compact Direct Mounts
    • Direct to Breadboard Mounting
    • 25.4mm Centerline Height
    • Compact Form Factor
    Metric Prism Mounts
    Metric Prism Mounts
    • Precision Fine Movement
    • Holds Prisms up to 30mm
    • Black Anodized Aluminum
    • Posts and Post Holders Required for Mounting
    English Prism Mounts
    English Prism Mounts
    • Easily Secure Prisms or Cube Beamsplitters
    • Adjustable for Optics up to 55mm
    • Rotary Version Offers Manual 360° Rotation

    Polarizer Mounts | View All

    Compact Direct Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×

    Compact Direct Mounts
    • Direct to Breadboard Mounting
    • 25.4mm Centerline Height
    • Compact Form Factor
    Rotation Kinematic Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×

    Rotation Kinematic Mounts
    • 360° Continuous Optic Rotation
    • 25.4mm Centerline Height
    • 5° Graduations
    Risley Prism Mount
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More

    Risley Prism Mount
    • Compact, Robust Mount for Beam Steering Applications Using Risley Prism Pairs
    • Manually Steer a Beam to any Angle up to ±2 Times the Individual Prism Deviation Angle
    • Optimized for Prisms with Wedge Angles Ranging from 0 to 26 Degrees
    • Mount Can be Used with Either a Single or Pair of Wedge Prisms
    Metric Polarizer Mounts
    Metric Polarizer Mounts
    • Coarse and Fine Movement Available
    • Black Anodized Aluminum
    • Posts and Post Holders Required for Mounting
    Rotary Optic Mount
    Rotary Optic Mount
    • Manual 360° Rotation
    • Available with Pre-Mounted Linear Polarizer
    • Compatible with T-Mount Optic Mounts

    Laser and Fiber Optic Mounts | View All

    Metric Laser Holders
    Metric Laser Holders
    • Twin Ring Mount Design
    • Fixed and Adjustable Versions
    • Ideal for He-Ne Lasers
    • Posts and Post Holders Required for Mounting
    V-Block Base
    V-Block Base
    • Adjustable Height Bar Clamp Included with #03-665
    • Ideal for Mounting Laser Tubes and Large Optical Elements
    • ¼-20 Tap Hole Allows Mounting to 0.50" Diameter Post
    Laser Diode Mounts
    Laser Diode Mounts
    • Compatible with a Variety of Laser Diode Modules
    • Multiple Mount Configurations
    • Compatible Diameters from 9.5-16mm
    Fiber Optic Alignment Mounts
    Fiber Optic Alignment Mounts
    • FC Fiber Connection
    • Two Axis Linear Movement for Precise Fiber Alignment
    • Optional Kinematic Tilt Version
    • Posts and Post Holders Required for Mounting
    Metric Spatial Filters
    Metric Spatial Filters
    • X-Y Micrometer Translation
    • Gimbal Tilt Control for Fiber Alignment
    • Z-Axis Translation for Objective Mount
    Spatial Filter Movement
    Spatial Filter Movement
    • X-Y Adjustable
    • Pre-Mounted on a Gimbal Tilt-Table
    • Open-Style Design
    Metric Beam Dump
    Metric Beam Dump
    • Absorbs Unwanted or Unused Laser Beams
    • 10mm Entrance Aperture
    • Posts and Post Holders Required for Mounting

    ×

    Need a Quote?

    Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram

    ×